Rolling Hangar Door System for Private Sky Aviation - Exterior

Sliding Hangar Door System

New Construction

High Wind Load Design

Private Sky Aviation Sliding Hangar Door KFMY

A 158 ft x 28 ft bi-parting sliding hangar door with two Well Bilt operators for the 40,000 sq ft Private Sky Aviation hangar in Ft. Myers, FL.

Client

Private Sky Aviation

Location

Fort Myers, FL

Industry

Aviation

Product

Scope

158 ft x 28 ft

bi-parting sliding hangar door

8

door leaves, 20 ft x 28 ft each

2

hangar door operators

120 mph

Florida wind load requirement the door is designed to exceed

Project Overview

How we approached it.

The 40,000 sq. ft. Private Sky aircraft hangar was completed in March 2002 at a cost of $3 million. Among its various features is a 158’ x 28’, bi-parting sliding hangar door by Well-Bilt Industries. The door has eight 20’ x 28’ leaves and is powered by a pair of Well-Bilt’s patented In-TheDoor  hangar door operators. With a 10” ship and car channel, 10” structural channels, 4” x 2” reinforcement tubing, telescopic top guide assemblies and 12”-diameter steel wheels, the door system is designed to exceed Florida’s 120 mph wind load requirements, and accommodate a future tail door. Kenneth Mayer of Greensboro, NC, designed the hangar. Bethlehem Construction Corp., Fort Myers, was the contractor. Rigid Building Systems, Houston, TX, manufactured the pre engineered metal building hangar.

Project Specs:

  • (1) 158′ x 28′ Sliding Hangar Door System
  • (2) Hercul-Eze Hangar Door Operators

01.

The Challenge

02.

The Solution

Well Bilt provided a bi-parting sliding door with eight 20 ft x 28 ft leaves powered by two patented operators. It uses a 10 in ship and car channel, 10 in structural channels, 4 in x 2 in reinforcement tubing, telescopic top guides and 12 in steel wheels.

03.

The Result

The door system is designed to exceed Florida's 120 mph wind load requirements. The hangar was completed in March 2002 at a cost of $3 million.

Installed on-site by the Well Bilt team

“

Private Sky Aviation

Equipment On This Project

The equipment behind the build.

How We Delivered It

One team. Start to finish.

01

Spec & Drawings

We review the existing door system and deliver engineered drawings and pricing within 24 hours.

02

Manufacture

Operators are fabricated in-house in Ocala, FL with heavy-duty steel housings and UL listed components.

03

Custom Finish

Powder coat in your brand colors with your logo on the housing, next to the Well Bilt nameplate.

04

Deliver & Install

Our crew delivers and installs on-site, then makes sure every door runs smoothly before we leave.

Start Your Project

Have a project like this? Let's build it.

Standard or fully custom, we manufacture, finish and install door systems built for your facility. Send your specs and get engineered drawings and pricing in 24 hours.

Since 1984  ·  UL Listed Components  ·  Licensed in FL, VA, CO, TX, AZ

Get Drawings & Pricing

352-528-5566
M-F 8a-5p EST

info@wellbiltdoors.com
We reply within one business day

""