Rolling Hangar Door System for Adal Fuel Cell Facility

Rolling Door System

Door Replacement

C-130 Tail Door

Adal Fuel Cell Facility in North Kinston, RI

A new rolling door system replacing a failing door system on an older building at the Adal Fuel Cell Facility in North Kinston, RI.

Client

Adal Fuel Cell Facility

Location

North Kinston, RI

Industry

Aviation

Product

Scope

150 ft

clear opening width

30 ft

door height

10 ft x 16 ft

tail door for a C-130

Project Overview

How we approached it.

WELL BILT Industries was contracted to supply a new door system as a replacement for a failing door system on an older building. After meeting with the general contractor, it was determined more cost effective to remove and replace the doors with a new system that would allow the successful operation and use of the doors for years to come.

The doors were designed for a clear opening of 150 feet and 30 feet tall with a 10’ x 16’ tall tail door to accommodate a C-130. The door is equipped with safe edge on the leading edge of the door system and NEMA 4 Controls, including cable festoons. The door’s upper guide system is comprised of Pancake top guides to match the previous condition and system requirements. The doors are equipped with steel wheel operation and gear reduction drives. The door was clad with 2.5” IMP on the outside and 26 gauge liner panel on the inside.

01.

The Challenge

An older building had a failing door system. After meeting with the general contractor, removing and replacing the doors was found to be more cost effective.

02.

The Solution

Well Bilt supplied a new door system with a 150 ft by 30 ft clear opening and a 10 ft x 16 ft tail door for a C-130. It has a safe edge, NEMA 4 controls with cable festoons, pancake top guides, steel wheels, gear reduction drives, 2.5 in IMP outside cladding and a 26 gauge liner.

03.

The Result

Installed on-site by the Well Bilt team

“

Adal Fuel Cell Facility

Equipment On This Project

The equipment behind the build.

How We Delivered It

One team. Start to finish.

01

Spec & Drawings

We review the existing door system and deliver engineered drawings and pricing within 24 hours.

02

Manufacture

Operators are fabricated in-house in Ocala, FL with heavy-duty steel housings and UL listed components.

03

Custom Finish

Powder coat in your brand colors with your logo on the housing, next to the Well Bilt nameplate.

04

Deliver & Install

Our crew delivers and installs on-site, then makes sure every door runs smoothly before we leave.

Start Your Project

Have a project like this? Let's build it.

Standard or fully custom, we manufacture, finish and install door systems built for your facility. Send your specs and get engineered drawings and pricing in 24 hours.

Since 1984  ·  UL Listed Components  ·  Licensed in FL, VA, CO, TX, AZ

Get Drawings & Pricing

352-528-5566
M-F 8a-5p EST

info@wellbiltdoors.com
We reply within one business day

""