Built to Last. Engineered to Perform
Hydraulic door systems from WELL BILT Industries are custom designed to meet the exact specifications of any building. Perfect for large aircraft as well as agriculture and commercial industries, these hangar doors offer maximum headroom and plenty of tail clearance. Single-piece construction provides durability and gives unparalleled protection from the elements.
Hydraulic 2 Rams
135' Wide, 40' Tall
Single Panel
Leverage agile frameworks to provide a robust synopsis for high level overviews. Iterative approaches to corporate strategy foster collaborative thinking to further the overall value proposition. Organically grow the holistic world view of disruptive innovation via workplace diversity and empowerment. Bring to the table win-win survival strategies to ensure proactive domination.
All Hydra-Eze hydraulic door systems come with a pre-hung frame that will transmit all of the dead weight and operational load to the structure and foundation. The hydraulic door frame is fabricated with ASTM A500 Grade B welded square and rectangular steel tubing 11 Gauge to 3/8″ wall thickness with minimum yield strength of 46,000 psi. All exterior corners are mitered at 45 degrees. All interior and exterior joints are welded on all sides for strength and to prevent water or moisture from entering the frame. The pre-hung frame comes with mounting locations for the hydraulic power unit, cylinders and lines.
Framing members are square and true to dimension in all directions, and they are not out of line more than 1/8 inch in 20 feet. Sections are fabricated to prevent bowing, racking and warping in order to hold specified tolerances.
Framing members shall be square and true to dimension in all directions and shall not be out of line horizontally or vertically more than 1/8 inch in 20 feet. Hydraulic Door sections shall be fabricated in a manner so as to prevent bowing, racking, or warping during fabrication in order to hold the sections to specified tolerances. Welds which could affect the fit or function of the Hydraulic Door shall be ground smooth.
All Hydra-Eze® Hydraulic Door systems are equipped with two industrial double-acting hydraulic cylinders rated at a minimum of 3000 PSI capacity to ensure safety, aid in preventing system failure, and to provide a long service life. The hydraulic cylinders are rebuildable for minimal maintenance costs.
Hydraulic operators are provided to open and close the door, and they come filled, purged and ready for bolt-in installation. The operator can hold the door in any position of travel, and it conforms to national electric codes. All operator systems use a keyed lock out to prevent unauthorized personnel operating the system.
Operators are heavy duty 2HP to 5HP (or larger) TEFC -type and mounted to the center above the door for balancing. Standard voltage is 230V single phase with 115V single phase. Three phase voltages (208V, 230V, 460V) are optional. Attached hydraulic pumps operate at a minimum 1000 PSI to a minimum of 2000 PSI as required for the system. This also acts as a margin of safety ensuring the pumps will not exceed rated operating pressures of all other hydraulic components.
Our list of standard features provides you with simplicity, from installation to operation. With only a few moving parts, the Hydra-Eze hydraulic hangar door is one of the doors on the market to operate.
Our Hydra-Eze hydraulic door has one of the longest service intervals of any large door on the market. Limited maintenance combined with very few moving parts makes this door highly reliable.
Well Bilt Industries is committed to delivering the safest, most reliable door on the market. We offer exclusive strength and safety components, like knuckle splice joints and pin points.
In accordance with DOT regulations and standard shipping practices, Hydra-Eze® Hydraulic Doors will be one piece when possible. If the system dimensions will not permit a one piece design, a fold over design will be utilized. The fold Lorem Ipsum is simply dummy text of the printing and typesetting industry.
Hydraulic lines will be a minimum of ¼” I.D. and a maximum of 3/8″ I.D. flexible braided line. All hydraulic lines will be equipped with SAE fittings and will be rated at a minimum of 3000 PSI. Hydraulic valves will have a minimum flow rating of 5 GPM and pressure rating of 3,000 PSI. Hydra-Eze® Hydraulic Doors will come equipped with 50 / 50 mechanical flow dividers to aid in load balancing the systems and an in-line flow regulator to adjust the opening and closing speed. The directional valve will be a minimum of 3,000 PSI rated and actuated by (2) 24-120VAC coils. All systems are equipped with a return line filter in addition to the in tank filter. The return line filter will be rated at 1,000 PSI and 20 GPM, it will also be equipped with a replaceable element for maintenance purposes.
Hydra-Eze® Hydraulic Doors equipped with optional features such as auto open/close will come equipped with pressure switches, plunger switches, and lever arm switches as needed. All limit switches will operate on 24VAC only.
Heavy duty hinges are welded on the Hydraulic Doors by WELL BILT INDUSTRIES. The number and location varies with Hydraulic Door size and wind load requirements. Top hinges are installed approximately every 10′-0″ apart, welded to the pre-hung frame and the Hydraulic Door. Center hinges, spaced approximately every 5′-0″ apart, are only installed on systems too tall to be shipped to the job site in one piece, therefore requiring the unit to be folded in half for shipping. Hinges are fabricated with 3/4 inch diameter pins and have been tested to withstand 15,000 lbs. tension loading. Top and center hinges are pre-lubed for life.
Hydraulic Door shall be provided with 1 inch diameter floor lock pins (cane bolts), the number based on the Hydraulic Door size and wind loading requirements. Floor lock pins are installed on the bottom Hydraulic Door frame member and are intended to engage 1-3/4″ diameter steel sleeved holes in the structures finished floor with a minimum of 3″ of penetration into the finished floor. The number and placement of the pins is dependent upon the Hydraulic Door size with a minimum of (3) cane bolts on any Hydraulic Door system.
WELL BILT INDUSTRIES Hydra-Eze® Hydraulic Door are factory tested prior to delivery. Factory testing is video taped and includes component, installation, maintenance and general operation details. A copy of this video will be duplicated and forwarded to the customer.
WELL BILT INDUSTRIES Hydraulic Doors are constructed to comply with all codes and specifications provided at the time an order is initiated. Wind load compliance certification by a professional engineer licensed to practice in the state of Florida is available if required. WELL BILT INDUSTRIES is a Miami-Dade County Approved Hangar Door Manufacturer and has been issued a Certificate of Competency.
WELL BILT INDUSTRIES shall provide EPDM style 40 black rubber 12″ top and 10″ bottom weather seals to be installed by others when the Hydraulic Door is being sheeted. EPDM is for outdoor and high temperature application and resists ozone, steam, water, oxygenated solvents plus animal and vegetable oils.
WELL BILT INDUSTRIES will provide each customer with an “Owner’s Manual” which details the specifics pertaining to their custom Hydraulic Door.
Wiring on the Hydraulic Door and in the control panel will be completed prior to delivery, and a color electrical schematic will be provided with the system. Wiring in the building from the control panel to the power unit, as well as the power supply to the control panel will be the responsibility of the installer. Materials required for the wiring of the building will be by others. The control system voltage will be 24-120VAC, primary voltage per customer specifications.
M-F 8a-5p EST
